1. General Information

Proposal Type: Budget Full		Date Required:
Company Name:
Address:
Town or City:	County:	Post Code:
Country: if not UK
Phone:	Fax:
Attn:
Email Address:

2. Description of material to be conveyed

Type of Ash:	Bottom Ash Fly Ash - Mechanical Collector Fly Ash - Bag House Fly Ash - Electrostatic Collector Bed Ash - Fluidized Bed Combustor
Origin of Ash:	Coal Other (Please describe below)
Bulk Density:	Aerated Kg/m3	Packed Kg/m3
Particle Size:	Maximum	Minimum
Particle Size Distribution:
Moisture Content (surface):	Maximum %	Minimum %
Temperature:	Maximum °C	Range °C
Flowability: (describe; 1 being poor and 5 being good)

3. Site conditions

Elevation:	Metres	Maximum Humidity:
Maximum Ambient Temperature:	°C	Minium Ambient Temperature:	°C
System Location:	Indoor Outdoor
Compressed Air Available:	Yes No	SCFM NM3/Min PSIG BARG
Operating Conditions - State Atex Zone:

4. Process Requirements

Type of Boiler / Combuster:
Number of Pick-Up Points:
Discharge Rate From Each Pick-Up Point:	lbs. / hr.
Distance Between Pick-Up Points:
Conveying Distance:	Metres Horizontal	Metres Vertical	Bends
Clearance Height at Pick-up Points:
Number of Silos to be Delivered to:
Please provide a description of your system requirements, e.g. Number of feed and reception points and any more neccessary information in this text box.

5. Complete This Section Only if Project is a Retrofit

Type of Existing System:	Vaccum Positive Pressure Dilute Phase Mechanical Blowpot
Manufacturers Name:
Total Power Consuption Currently Used:	Hp.
Reasons for Replacement of System:

6. Scope of Supply (Please check all that apply)

Transporter	Bins / Silos	Level Indicators
Weigh System	Filters	Blower / Compressor
Distribution Valves	Bends	Terminal Box
Straight Pipe	Controls	Other (specify below)