-General Info-

  • Corporate Information
  • Worldwide Locations
  • Sales Divisions

    -Product Lines-

  • Pneumatic Conveying Systems
  • Pneumatic Injection Systems
  • Inflatable Seat Valves

    -Website Info-

  • Website Map
  • Search (under construction)

  • HOME
  • EMAIL
  • E-FORMS

    Mactenn Systems, Ltd.
    One Bull Lane, Acton
    Sudbury, Suffolk
    CO10 0BD
    ENGLAND

    44 (1787) 882 422

    www.mactenn.com

  • Pneumatic Injection Requirements E-Form
      When complete, please click the "Submit" button at the bottom of the form.
      Or print out, and mail or fax to your representative or our office.

      1. General Information

      Proposal Type:
      Budget
      Full
      Date Required:
      Company Name:
      Address:

      Town or City: County: Post Code:
      Country: if not UK
      Phone:
      Fax:
      Attn:
      Email Address:



      2. Description of material to be conveyed

      Material Name:
      Material Use:
      Bulk Density: Aerated Kg/m3 Packed Kg/m3
      Particle Size: Maximum Minimum
      Particle Size Distribution:
      Moisture Content (surface): Maximum % Minimum %
      Temperature: Maximum °C Range °C
      Temperature Sensitive: Yes No - If Yes, expliain below
      Flowability:
      (describe; 1 being poor and 5 being good)
      Hygroscopicity: Yes No
      Corrosive: Yes No
      Caustic: Yes No
      Explosive: Yes No
      Angle of Repose: °



      3. Site conditions

      Elevation: Metres Maximum Humidity:
      Maximum Ambient Temperature: °C Minium Ambient Temperature: °C
      System Location: Indoor Outdoor
      Compressed Air Available: Yes No SCFM NM3/min
      PSIG BARG



      4. Process Requirements

      Injection Rate: tons / hr. Operation Duty: hrs. / wk.
      Conveying Distance: Metres Horizontal Metres Vertical Bends
      Process Back Pressure: tons / min. Flow Rate Accuracy*: %
      Turn Down Requirements: Injection Type: Batch Continuous
      How is the System to be fed?
      Headroom Available at Feed Point: Metres
      System to Inject to:
      System Construction: Standard
      304 SS
      316 SS
      Other (specify below)
      Please provide any more neccessary information in this text box.



      5. Scope of Supply (Please check all that apply)

      Injector Bins / Silos Level Indicators
      Weigh System Filters Blower / Compressor
      Distribution Valves Bends Terminal Box
      Strait Pipe Controls Other (specify below)


      When complete, please click the "Submit" button.
      Or print out, and mail or fax to your representative or our office.



    HOMETOPEMAIL